Tencel sourcing note

How to Choose Stretch Fabric for Wholesale: A 7-Step Procurement Checklist

2026-10-09 · Jonas Richter

Who This Checklist Is For

If you're sourcing stretch fabric for a wholesale order—whether it's your first time working with a mill or your fifteenth—this checklist is for you. I'm writing from the buyer's side, not the mill's. I manage vendor relationships and purchase orders; I'm not a textile engineer. So I won't pretend to explain fiber chemistry or yarn-spinning mechanics.

What I can share is the process that's saved me from expensive mistakes—seven steps I run through before I sign off on any stretch fabric order.

A few years back, our office refresh included a West Elm Tencel frame rug. I remember thinking "Tencel means stretchy, right?" It doesn't. That misunderstanding—which thankfully cost me nothing because I wasn't the one buying it—is exactly the kind of assumption that trips up B2B buyers. So let's start there.

Step 1: Define What "Stretch" Actually Means for Your End Product

"Stretch fabric" is one of those phrases that means five different things to five different vendors. Before you contact anyone, get specific:

  • How much stretch do you need? 10%? 30%? 50%? This determines your fiber blend.
  • Which direction? Two-way (horizontal or vertical) or four-way (both)?
  • Recovery requirement? How much does the fabric need to snap back after stretching?

Most apparel and upholstery applications need four-way stretch with good recovery. The standard test method for this is ASTM D2594 (Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power). Ask your supplier for stretch and recovery test data. If they can't provide it, that's your first red flag.

What most buyers don't realize is that "standard stretch" from one mill can mean something completely different from another. Always get numbers, not adjectives.

Step 2: Lock Down Your Fiber Composition (This Is Where Tencel and Viscose Get Tricky)

Here's something that took me an embarrassingly long time to internalize: Tencel fabric is not inherently stretchy. Tencel (lyocell) is a sustainable cellulosic fiber—great moisture management, soft hand feel, biodegradable. But on its own, it has minimal elasticity.

If you want stretch, you need to blend it. Common combinations include:

  • Tencel + spandex (typically 92-95% Tencel, 5-8% spandex)
  • Tencel + elastane for higher stretch requirements
  • Tencel + cotton + spandex for a more structured stretch fabric

The same logic applies to viscose fiber sourcing. Viscose is soft and drapey but has poor wet strength and almost zero natural stretch. If you're sourcing viscose for a stretch application, you'll need an elastic fiber in the blend.

When you're comparing suppliers, ask for the exact percentage breakdown of every fiber. "Tencel blend" isn't specific enough.

Step 3: Verify Weight and Width Before Requesting Samples

This step gets skipped constantly, and I've seen it cause problems at the production stage. Fabric weight (GSM) and usable width directly affect:

  • How the fabric drapes and handles
  • Cutting efficiency (narrower fabric = more waste)
  • Shipping costs (heavier fabric = higher freight)
  • Whether the final product meets your customer's spec

Get these numbers in writing before samples ship. Ask: "What is the GSM tolerance?" A ±5% variance is standard; anything wider and you may get fabric that behaves differently from your approved sample.

Step 4: Test Colorfastness—Don't Trust the Swatch Alone

A pretty swatch tells you almost nothing about production colorfastness. Request test reports for:

  • Wash fastness (how much color bleeds in laundering)
  • Light fastness (fading under UV exposure)
  • Rubbing fastness (both wet and dry crocking)

For brand-critical colors, use the Pantone Matching System as your reference. Industry tolerance for color matching is typically Delta E < 2 for brand colors—Delta E of 2-4 is noticeable to trained observers, and above 4 is visible to most people. Your supplier should be able to tell you their color-matching tolerance upfront.

Step 5: Match Your Sewing Thread to Your Fabric (Most Buyers Forget This)

This is the step I see overlooked most often, and it has real production consequences. The wrong sewing thread causes seam failure, puckering, and needle damage—all of which show up after you've already paid for the fabric.

If your stretch fabric contains polyester, your thread should generally be polyester too. This is where choosing the right polyester sewing thread manufacturer matters. Not all polyester threads are equal—the quality varies based on:

  • Coating and lubrication (affects machine performance)
  • Tenacity and elongation (must match fabric stretch)
  • Color consistency across dye lots

Ask your fabric supplier whether they can recommend a thread manufacturer who's tested with their fabric. If they can't, that's not necessarily disqualifying—but it means you'll need to do your own compatibility testing before bulk production.

Step 6: Audit Supplier Capability Before You Commit

I'm not a compliance expert, so I can't speak to every certification requirement across every market. What I can tell you from a procurement perspective is which questions separate capable suppliers from order-takers:

  • "Can you provide OEKO-TEX Standard 100 certification for this fabric?" (This confirms it's tested for harmful substances.)
  • "Are you licensed by Lenzing for Tencel production?" (Tencel is a branded fiber—only authorized mills carry it.)
  • "What's your monthly production capacity for this specific fabric?" (A supplier who says "unlimited" is not being honest.)
  • "Can you share two or three current customer references in similar product categories?"

Here's something I've learned the hard way: a supplier who says "we can do everything" is usually a supplier who does nothing particularly well. I'd rather work with a mill that says "stretch knits are our strength, but we don't do woven cotton" than one that claims to handle all fabric types. The specialist who knows their boundaries is almost always more reliable.

Step 7: Place a Trial Order Before Bulk Commitment

Never go from approved swatch to full production without a trial run. Your trial order should include:

  1. Production-intent fabric (not a lab dip or hand sample)
  2. Enough yardage to sew a full garment or product
  3. Full QC documentation—stretch test results, colorfastness reports, GSM verification
  4. Shipping timeline in writing with specific dates

The trial order is your last cheap chance to catch problems. I still kick myself for skipping this step on a rush order back in 2022—we ended up with fabric that tested well on swatches but shrank 6% after the first wash. That's not a defect you catch in a swatch.

Common Mistakes to Avoid

Before you close this tab and start emailing suppliers, here's the short list of things I've seen go wrong (some of them, unfortunately, my own):

  • Assuming Tencel = stretch. It doesn't. Check the blend.
  • Skipping the thread specification. Your fabric is only as good as the seams holding it together.
  • Trusting verbal promises on lead times. Get dates in writing—every single time.
  • Comparing suppliers on price alone. Landed cost (including freight, duties, and defect rates) is the number that matters.
  • Not asking about minimum order quantities upfront. Nothing wastes more time than negotiating a price for a quantity the mill won't actually produce.

Bottom line: choosing stretch fabric for wholesale isn't about finding the cheapest option. It's about finding a supplier whose capabilities match your specific requirements—and who's honest about what they can and can't do. Trust me on this one: the vendor who tells you "this isn't our strength" will save you more money than the one who says yes to everything.

Jonas Richter
Jonas Richter

Jonas Richter is a protective and industrial-textile analyst covering flame-resistant workwear fabrics, aramid constructions, cut-resistant knits, antistatic textiles, high-visibility materials, coated protection layers, and ballistic fabric assemblies. He uses ISO 15025 for limited flame spread and ISO 13997 for cut resistance while separately examining afterflame, afterglow, char length, cut force, areal density, tensile strength, puncture resistance, electrostatic behavior, and conditioning. His evidence-led guides help PPE developers, safety teams, and buyers specify hazards, test scope, layer interactions, durability, and acceptance limits without treating one result as universal protection.